```serial_adapter``` which is a serial port you're using.
On linux it is /dev/ttyUSBx and on windows it is COMx
```wait_time``` is the interval in which script is checking temperature. By default it is 300 seconds, which is 5 minutes.
### Systemd
First create virtual enviroment
```
python3 -m venv venv
```
Then install required modules
```
venv/bin/pip3 install PySerial
```
After that you just need to change a few things
```SERIALADAPTER``` to a port you're using.
On linux it is /dev/ttyUSBx and on windows it is COMx
```EPPYSLEEPY``` is the interval in which script is checking temperature. By default it is 300 seconds, which is 5 minutes.
### Proxmox LXC
You can also run it in LXC container on your Proxmox host. Just follow the [systemd](###Systemd) instructions.
Here you will also need to add ```/dev/ttyUSBx``` to your LXC container. You do it under Resources -> Add -> Device Passthrough -> ```/dev/ttyUSBx``` as Device Path.
