From cabf0beae53bdfb00610b4b4823ead71f6a74171 Mon Sep 17 00:00:00 2001 From: YuruC3 Date: Wed, 1 Apr 2026 19:14:13 +0200 Subject: [PATCH] README --- README.md | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 README.md diff --git a/README.md b/README.md new file mode 100644 index 0000000..488dd7a --- /dev/null +++ b/README.md @@ -0,0 +1,54 @@ +# RPi Zero 2W NTP server + +It s a project where I have created a NTP Stratum 1 server with 100Mbps Ethernet port and Alide GT-U7 GPS module that gets time from satelites and works as a stratum 0 source. + + + +## Chrony configuration + +The file **chrony.conf** is my example from ```/etc/chrony/chrony.conf```. It has the configuration for allowing RFC1918 (all private networks) and to use GT-U7 GPS module. + +## Boot configuration + +After attaching everything correctly the **config.txt** file in ```/boot/firmware/config.txt``` needs to be edited to enable dtoverlay dwc2 module and UART for GT-U7, then SPI and dtoverlay w5500 module for the 100Mbps port. Lastly GPIO 18 is specified as PPS pin by loading dtoverlay pps-gpio module and specifying GPIO18 as the PPS source. + +## Telegraf configuration + +The **gpsdMeasurement.py** file goes to ```/etc/telegraf``` and **inputs.conf** and **outputs.conf** go to ```/etc/telegraf/telegraf.d/```. + +The only file that needs to be edited is **outputs.conf** because it has the destinations to which metrics will be sent. In my case it was InfluxDBv2 + +## EasyEDA folder + +There is a schematic to how connect the Raspberry Pi Zero 2W with W5500 and GT-U7 modules. There is also a 5V regulator but it can be ommited if a stable 5V source is provided (like USB). + +## influxMeasurements file + +There is a description of each metric that is collected by **gpsdMeasurement.py** script + +## dashboard.json file + +It has a Dashboard for Grafana that visualizes the data collected + +## Price + +Total price should be around 15 Euro for the GPS module, 10 Euro for the GPS antenna, 4 Euro for a SD card, around 4 Euro on Aliexpress for the W5500 module and 21 Euro for a Raspberry Pi Zero 2 W. + +In total the price should come to approximately 50 Euro excluding soldering station, solder, cables, power supply (can be whatever USB-A power plug as long as it gives 5V 1A). + +## Some pictures + +### How the server looks +Here is a picture of my current "in production" NTP server. It is not the prettiest but it works. I do not have a 3D printer so I can not print a nice enclousre for it. I have also decided to add additional heatsinks for the WiFI chip, CPU, SD card, and the W5500 chip (it was getting pretty hot to touch). +![picture of the NTP server](./pictures/server.png) + +### How the Dashboard looks +Here is how the Dashboard looks in Grafana. Note that GPS Data section repeats on both images. +![Dashboard image 1](./pictures/1.png) +![Dashboard image 2](./pictures/2.png) + +### Sources and Inspirations + +My initial inspiration for setting up that local NTP server was a post by [spookyghost on NetworkProfile.org](https://blog.networkprofile.org/gps-backed-local-ntp-server/). It was a basis for how and where to connect the GT-U7 module. + +Second port that inspired me when it came to Grafana, telegraf and that Python measurement script was by [shrunbr on blog.shrunbr.dev](https://blog.shrunbr.dev/posts/stratum-1-ntp/). It gave me a good overview on how telegraf works and how inputs and outputs.conf is configured. The same goes for my Dashboard in Grafana. Shrunbr's dashboard was my startpoint, even though I had to remap all the values. \ No newline at end of file